D-Link DGS-1510/ME Series - Disable 802.1 X; Create 802.1 X User <Username 15

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
37
Example
To enable the 802.1X function:
DGS-1510-28XMP/ME:admin# enable 802.1x
Command: enable 802.1x
Success.
DGS-1510-28XMP/ME:admin#
4-2 disable 802.1x
Description
This command is used to disable the 802.1X function.
Format
disable 802.1x
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the 802.1X function:
DGS-1510-28XMP/ME:admin# disable 802.1x
Command: disable 802.1x
Success.
DGS-1510-28XMP/ME:admin#
4-3 create 802.1x user
Description
This command is used to create an 802.1X user.
Format
create 802.1x user <username 15>