D-Link DGS-1510/ME Series - Chapter 36 Layer 2 Protocol Tunneling (L2 PT) Command List

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
304
Chapter 36 Layer 2 Protocol Tunneling (L2PT)
Command List
enable l2protocol_tunnel
disable l2protocol_tunnel
config l2protocol_tunnel ports [<portlist> | all] type [uni tunneled_protocol [{stp | gvrp | protocol_mac [01-00-0C-
CC-CC-CC | 01-00-0C-CC-CC-CD]}(1) | all] {threshold <value 0-65535>} | nni | none]
show l2protocol_tunnel {[uni | nni]}
36-1 enable l2protocol_tunnel
Description
This command is used to enable the Layer 2 protocol tunneling function.
Format
enable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the Layer 2 protocol tunneling function:
DGS-1510-28XMP/ME:admin# enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DGS-1510-28XMP/ME:admin#
36-2 disable l2protocol_tunnel
Description
This command is used to disable the L2PT function globally on the Switch.
Format
disable l2protocol_tunnel