D-Link DGS-1510/ME Series - Show Snmp View

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
549
67-12 show snmp view
Description
This command is used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Parameters
<view_name 32> - (Optional) Enter the view name here. The name can be up to 32 characters long.
Restrictions
None.
Example
To show SNMP view:
DGS-1510-28XMP/ME:admin# show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
--------------------- ------------------------ ----------
view123 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 9
DGS-1510-28XMP/ME:admin#
67-13 create snmp host
Description
This command is used to create a recipient of an SNMP trap operation.
Format
create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]] <auth_string32>