D-Link DGS-1510/ME Series - Network Monitoring Command Command List; show packet ports

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
439
Chapter 51 Network Monitoring Command List
show packet ports <portlist>
show error ports <portlist>
show utilization [cpu | ports]
show utilization dram
show utilization flash
clear counters {ports <portlist>}
51-1 show packet ports
Description
This command is used to display statistics about the packets sent and received by the Switch.
Format
show packet ports <portlist>
Parameters
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display the packets analysis for port 7: