D-Link DGS-1510/ME Series - Password Recovery Command List; enable password_recovery

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
630
Chapter 81 Password Recovery Command List
enable password_recovery
disable password_recovery
show password_recovery
81-1 enable password_recovery
Description
This command is used to enable the password recovery mode.
Format
enable password_recovery
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the password recovery mode:
DGS-1510-28XMP/ME:admin# enable password_recovery
Command: enable password_recovery
Success.
DGS-1510-28XMP/ME:admin#
81-2 disable password_recovery
Description
This command is used to disable the password recovery mode.
Format
disable password_recovery
Parameters
None.