D-Link DGS-1510/ME Series - Page 635

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
631
Restrictions
Only Administrators can issue this command.
Example
To disable the password recovery mode:
DGS-1510-28XMP/ME:admin# disable password_recovery
Command: disable password_recovery
Success.
DGS-1510-28XMP/ME:admin#
81-3 show password_recovery
Description
This command is used to display the password recovery state.
Format
show password_recovery
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display the password recovery state:
DGS-1510-28XMP/ME:admin# show password_recovery
Command: show password_recovery
Running Configuration : Enabled
NV-RAM Configuration : Enabled
DGS-1510-28XMP/ME:admin#