D-Link DGS-1510/ME Series - Page 118

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
114
10-17 disable ipif
Description
This command is used to disable an IP interface.
Format
disable ipif [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters long.
all - Specifies that all the IP interfaces will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable an IP interface:
DGS-1510-28XMP/ME:admin# disable ipif newone
Command: disable ipif newone
Success.
DGS-1510-28XMP/ME:admin#
10-18 show ipif
Description
This command is used to display an IP interface.
Format
show ipif {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) Enter the IP interface name used here. This name can be up to 12 characters long.
Restrictions
None.
Example
To display an IP interface: