D-Link DGS-1510/ME Series - Page 173

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
169
DGS-1510-28XMP/ME:admin# config cpu access_profile profile_id 1 add access_id 1 ip
vlan default source
_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code
32 port 1 deny
Command: config cpu access_profile profile_id 1 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port 1
deny
Success.
DGS-1510-28XMP/ME:admin#
17-4 enable cpu interface filtering
Description
This command is used to enable CPU interface filtering control.
Format
enable cpu_interface_filtering
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable cpu_interface_filtering:
DGS-1510-28XMP/ME:admin# enable cpu_interface_filtering
Command: enable cpu_interface_filtering
Success.
DGS-1510-28XMP/ME:admin#
17-5 disable cpu interface filtering
Description
This command is used to disable CPU interface filtering control.
Format
disable cpu_interface_filtering
Parameters
None.