D-Link DGS-1510/ME Series - Page 228

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
224
To configure the ring state of the ERPS:
DGS-1510-28XMP/ME:admin# config erps raps_vlan 4094 state enable
Command: config erps raps_vlan 4094 state enable
Success.
DGS-1510-28XMP/ME:admin#
26-6 config erps log
Description
This command is used to configure the log state of ERPS events.
Format
config erps log [enable | disable]
Parameters
enable - Specifies to enable the log state.
disable - Specifies to disable the log state. This is the default option.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the ERPS log state:
DGS-1510-28XMP/ME:admin# config erps log enable
Command: config erps log enable
Success.
DGS-1510-28XMP/ME:admin#
26-7 config erps trap
Description
This command is used to configure trap state of ERPS events.
Format
config erps trap [enable | disable]
Parameters
enable - Specifies to enable the trap state.