DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
273
31-21 show igmp_snooping statistics counter
Description
This command is used to display the statistics counter for IGMP protocol packets that are received by the Switch
since IGMP snooping was enabled.
Format
show igmp_snooping statistic c
ounter [vlan <vlan_name> | v
lanid <vlanid_list> | ports <portli
st>]
Parameters
vlan - Specifies a VLAN to be displayed.
<vlan_name> - Enter the VLAN name here.
vlanid - Specifies a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list here.
ports - Specifies a list of ports to be displayed.
<portlist> - Enter the list of ports to be displayed here.
Restrictions
None.
Example
To display the IGMP snooping statistics counter:
To Next Page
Loading...
