DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
286
vlan_name - Specifies the name of the VLAN to which the blocked MAC address belongs.
<vlan_name> - Enter the VLAN name used.
mac_address - Specifies the MAC address of the entry or the blocked MAC address.
<macaddr> - Enter the MAC address of the entry or the blocked MAC address.
Restrictions
None.
Example
To show the IMPB entries that are blocked:
DGS-1510-28XMP/ME:admin# show address_binding blocked all
Command: show address_binding blocked all
VID VLAN Name MAC Address Port
---- -------------------------------- ----------------- ----
1 default 00-0C-6E-AA-B9-C0 1
Total Entries : 1
32-8 show address_binding ip_mac
Description
This command is used to display the IMPB entries.
Format
show address_binding ip_mac [all | [[ipaddress <ipaddr>] mac_address <macaddr>]]
Parameters
all - Specifies that all the IP addresses to be displayed.
ipaddress - Specifies the learned IP address of the entry in the database.
<ipaddr> - Enter the learned IP address.
mac_address - (Optional) Specifies the MAC address of the entry in the database.
<macaddr> - Enter the MAC address here.
Restrictions
None.
Example
To show IMPB entries:
To Next Page
Loading...
