D-Link DGS-1510/ME Series - Page 341

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
337
Example
To display the Switch’s general LLDP-MED configuration status:
DGS-1510-28XMP/ME:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class : Network Connectivity Device
Hardware Revision : A1
Firmware Revision : 1.00.001
Software Revision : 1.00.012
Serial Number : T3941C1000029
Manufacturer Name : D-Link
Model Name : DGS-1510-28XMP/ME Gigabit Ethern
Asset ID :
PoE Device Type : PSE Device
PoE PSE Power Source : Primary
LLDP-MED Configuration:
Fast Start Repeat Count : 5
LLDP-MED Log State:Enabled
DGS-1510-28XMP/ME:admin#
39-7 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for populating outbound
LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of ports to be displayed.
Restrictions
None.
Example
To display LLDP-MED information currently available for populating outbound LLDP-MED advertisements for port
1: