DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
32
DGS-1510-28XMP/ME:admin# enable pvid auto_assign
Command: enable pvid auto_assign
Success.
3-13 disable pvid auto assign
Description
This command is used to disable auto assignment of PVID.
Format
disable pvid auto_assign
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the auto-assign PVID:
DGS-1510-28XMP/ME:admin# disable pvid auto_assign
Command: disable pvid auto_assign
Success.
3-14 show pvid auto_assign
Description
This command is used to display the PVID auto-assignment state.
Format
show pvid auto_assign
Parameters
None.
Restrictions
None.
To Next Page
Loading...
