D-Link DGS-1510/ME Series - Page 368

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
364
DGS-1510-28XMP/ME:admin#show mac_based_access_control_local vlan default
Command: show mac_based_access_control_local vlan default
MAC Address VID
----------------- ----
00-11-22-33-44-55 1
Total Entries:1
DGS-1510-28XMP/ME:admin#
42-16 show mac_based_access_control auth_state ports
Description
This command is used to display the MAC-based Access Control authentication status on port.
Format
show mac_based_access_control auth_state ports {<portlist>}
Parameters
<portlist> - (Optional) Enter the list of ports used for this configuration here.
If no parameter is specified, all of the MAC-based Access Control ports authentication status will be displayed.
Restrictions
None.
Example
To display the MAC-based Access Control authentication status on port 1-4:
DGS-1510-28XMP/ME:admin# show mac_based_access_control auth_state ports 1-4
Command: show mac_based_access_control auth_state ports 1-4
(P): Port-based
Port MAC Address State VID Priority Aging Time/
Block Time
---- -------------------- -------------- ---- -------- ------------
Total Authenticating Hosts : 0
Total Authenticated Hosts : 0
Total Blocked Hosts : 0
DGS-1510-28XMP/ME:admin#