D-Link DGS-1510/ME Series - Page 425

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
421
DGS-1510-28XMP/ME:admin# config igmp_snooping multicast_vlan forward_unmatched enable
Command: config igmp_snooping multicast_vlan forward_unmatched enable
Success.
DGS-1510-28XMP/ME:admin#
48-13 show igmp_snooping multicast_vlan
Description
This command is used to display information for IGMP snooping multicast VLANs.
Format
show igmp_snooping multicast_vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32 characters long.
Restrictions
None.
Example
To display all IGMP snooping multicast VLANs:
DGS-1510-28XMP/ME:admin# show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
IGMP Multicast VLAN Global State : Disabled
IGMP Multicast VLAN Forward Unmatched : Disabled
VLAN Name : test
VID : 100
Member(Untagged) Ports : 1
Tagged Member Ports :
Source Ports : 3
Untagged Source Ports :
Status : Disabled
Replace Source IP : 0.0.0.0
Remap Priority : None
Total Entries: 1
DGS-1510-28XMP/ME:admin#