D-Link DGS-1510/ME Series - Page 464

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
460
DGS-1510-28XMP/ME:admin# config port_security vlan vlanid 1 max_learning_addr 64
Command: config port_security vlan vlanid 1 max_learning_addr 64
Success.
DGS-1510-28XMP/ME:admin#
55-4 delete port_security_entry
Description
This command is used to delete a port security entry.
Format
delete port_security_entry [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] mac_address <macaddr>
Parameters
vlan - Specifies the VLAN by VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Specifies the VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID list here. This value must be between 1 and 4094.
mac_address - Specifies the MAC address of the entry.
<macaddr> - Enter the MAC address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the port security entry with a MAC address of 00-00-00-00-00-01 on VLAN 1:
DGS-1510-28XMP/ME:admin# delete port_security_entry vlanid 1 mac_address 00-00-00-00-00-01
Command: delete port_security_entry vlanid 1 mac_address 00-00-00-00-00-01
Success.
DGS-1510-28XMP/ME:admin#
55-5 clear port_security_entry
Description
This command is used to clear the MAC entries learned by the port security function.
Format
clear port_security_entry {ports [<portlist> | all] {[vlan <vlan_name 32> | vlanid <vidlist>]}}