DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
486
Parameters
ports – (Optional) Specifies a list of ports to be displayed.
<portlist> - Enter the list of ports to be displayed here.
cvid - (Optional) Specifies the rules for the specified CVIDs.
<vidlist> - Enter the CVID value used here.
Restrictions
None.
Example
To show C-VLANs based on VLAN translation rules in the system:
DGS-1510-28XMP/ME:admin# show vlan_translation
Command: show vlan_translation
Port CVID SPVID Action Priority
----- -------- -------- ------- ---------
1 20 200 Replace -
1 30 300 Add -
Total Entries: 2
To Next Page
Loading...
