D-Link DGS-1510/ME Series - Page 516

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
512
DGS-1510-28XMP/ME:admin# show auth_client
Command: show auth_client
radiusAuthClient ==>
radiusAuthClientInvalidServerAddresses 0
radiusAuthClientIdentifier
radiusAuthServerEntry ==>
radiusAuthServerIndex :1
radiusAuthServerAddress 0.0.0.0
radiusAuthClientServerPortNumber 0
radiusAuthClientRoundTripTime 0
radiusAuthClientAccessRequests 0
radiusAuthClientAccessRetransmissions 0
radiusAuthClientAccessAccepts 0
radiusAuthClientAccessRejects 0
radiusAuthClientAccessChallenges 0
radiusAuthClientMalformedAccessResponses 0
radiusAuthClientBadAuthenticators 0
radiusAuthClientPendingRequests 0
radiusAuthClientTimeouts 0
radiusAuthClientUnknownTypes 0
radiusAuthClientPacketsDropped 0
DGS-1510-28XMP/ME:admin#
61-9 show acct_client
Description
This command is used to display information of RADIUS accounting client.
Format
show acct_client
Parameters
None.
Restrictions
None.
Example
To display information of RADIUS accounting client: