D-Link DGS-1510/ME Series - Page 527

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
523
DGS-1510-28XMP/ME:admin# config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
DGS-1510-28XMP/ME:admin#
63-8 enable ssh
Description
This command is used to enable SSH server services.
Format
enable ssh
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SSH server:
DGS-1510-28XMP/ME:admin# enable ssh
Command: enable ssh
Success.
DGS-1510-28XMP/ME:admin#
63-9 disable ssh
Description
This command is used to disable SSH server services.
Format
disable ssh
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.