D-Link DGS-1510/ME Series - Page 536

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
532
DGS-1510-28XMP/ME:admin# show tech_support
Command: show tech_support
#-------------------------------------------------------------------------------
# DGS-1510-28XMP/ME Gigabit Ethernet Switch
# Technical Support Information
#
# Firmware: Build 1.00.018
# Copyright(C) 2015 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
******************** Basic System Information ********************
[SYS 2015-4-8 11:55:18]
Boot Time : 8 Apr 2015 10:52:01
RTC Time : 2015/04/08 11:55:18
Boot PROM Version : Build 1.00.001
Firmware Version : Build 1.00.018
Hardware Version : A1
Serial number : T3941C1000029
MAC Address : 00-01-02-03-04-00
[ERROR_LOG 2015-4-8 11:55:18]
Error log is empty.
******************** System Log ********************
65-2 upload tech_support_toTFTP
Description
This command is used to upload the information of technique’s support to TFTP server.
• Basic System information
• System log
• Running configuration
• Layer 1 information
• Layer 2 information
• Layer 3 information
• Application
• OS status
• Controller’s status
This command can be interrupted by Ctrl - C or ESC when it is executing.
Format
upload tech_support_toTFTP {<ipaddr> <path_filename 64>}