D-Link DGS-1510/ME Series - Page 54

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
50
DGS-1510-28XMP/ME:admin# config 802.1x guest_vlan ports 2-8 state enable
Command: config 802.1x guest_vlan ports 2-8 state enable
Warning, The ports are moved to Guest VLAN.
Success.
DGS-1510-28XMP/ME:admin#
4-20 show 802.1x guest_vlan
Description
This command is used to show the information of guest VLANs.
Format
show 802.1x guest_vlan
Parameters
None.
Restrictions
None.
Example
To show 802.1X guest VLAN on the Switch:
DGS-1510-28XMP/ME:admin# show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Setting
-----------------------------------------------------------
Guest VLAN : guestVLAN
Enabled Guest VLAN Ports : 2-8
DGS-1510-28XMP/ME:admin#