DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
545
auth_priv - Specifies to support packet authentication and encrypting.
read_view - (Optional) Specifies that the view name would be read.
<view_name 32> - Enter the read view name here. This name can be up to 32 characters long.
write_view - (Optional) Specifies that the view name would be write.
<view_name 32> - Enter the write view name here. This name can be up to 32 characters long.
notify_view - (Optional) Specifies that the view name would be notify.
<view_name 32> - Enter the notify view name here. This name can be up to 32 characters long.
Restrictions
Only Administrators can issue this command.
Example
To create SNMP group “group123”:
DGS-1510-28XMP/ME:admin# create snmp group group123 v3 auth_priv read_view CommunityView
write_view CommunityView notify_view CommunityView
Command: create snmp group group123 v3 auth_priv read_view CommunityView write_view
CommunityView notify_view CommunityView
Success.
67-8 delete snmp group
Description
This command is used to remove a SNMP group.
Format
delete snmp group <groupname 32>
Parameters
<groupname 32> - Enter the name of the group will be deleted.
Restrictions
Only Administrators can issue this command.
Example
To delete SNMP group “group123”:
To Next Page
Loading...
