D-Link DGS-1510/ME Series - Page 58

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
54
Format
disable authen_policy
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable system access authentication policy:
DGS-1510-28XMP/ME:admin# disable authen_policy
Command: disable authen_policy
Success.
DGS-1510-28XMP/ME:admin#
5-5 show authen_policy
Description
This command is used to display that system access authentication policy is enabled or disabled.
Format
show authen_policy
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display system access authentication policy:
DGS-1510-28XMP/ME:admin# show authen_policy
Command: show authen_policy
Authentication Policy : Enabled
DGS-1510-28XMP/ME:admin#