DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
585
Format
delete syslog host [<index 1-4> | all]
Parameters
<index> - Enter the host index value here.
all - Specifies that all the host indexes will be used.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the specific syslog host:
DGS-1510-28XMP/ME:admin# delete syslog host 4
Command: delete syslog host 4
Success.
70-10 show syslog host
Description
This command is used to display the syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
<index> - (Optional) Enter the host index value here.
If no parameter is specified, all hosts will be displayed.
Restrictions
None.
Example
To show the syslog host information:
To Next Page
Loading...
