DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
603
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNTP:
DGS-1510-28XMP/ME:admin# enable sntp
Command: enable sntp
Success.
74-4 disable sntp
Description
This command is used to turn off SNTP support.
Format
disable sntp
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNTP:
DGS-1510-28XMP/ME:admin# disable sntp
Command: disable sntp
Success.
74-5 config time
Description
This command is used to configure time and date settings of the device.
Format
config time <date ddmthyyyy> <time hh:mm:ss>
To Next Page
Loading...
