DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
623
Parameters
default - Specifies to delete an IP default route (0.0.0.0/0).
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IP default route:
DGS-1510-28XMP/ME:admin# delete iproute default 10.1.1.254
Command: delete iproute default 10.1.1.254
Success.
79-3 show iproute
Description
This command is used to display the Switch’s current IP routing table.
Format
show iproute {<network_address>} {static}
Parameters
<network_address> - (Optional) Enter the destination network address of the route to be displayed.
static - (Optional) Specifies to display only static routes. One static route may be active or inactive.
Restrictions
None.
Example
To display the contents of the IP routing table:
To Next Page
Loading...
