D-Link DGS-1510/ME Series - Page 70

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
66
Restrictions
Only Administrators can issue this command.
Example
To create a TACACS+ authentication server host, its listening port number is 15555 and timeout value is 10
seconds:
DGS-1510-28XMP/ME:admin# create authen server_host 10.1.1.222 protocol tacacs+ port 15555
timeout 10
Command: create authen server_host 10.1.1.222 protocol tacacs+ port 15555 timeout 10
Key is empty for TACACS+ or RADIUS.
Success.
DGS-1510-28XMP/ME:admin#
5-21 config authen server_host
Description
This command is used to configure an authentication server host.
Format
config authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | [key
[<key_string 254> | none]] | timeout <int 1-255> | retransmit <int 1-20>}
Parameters
<ipaddr> - Enter the server host IP address.
protocol - Specifies the host's authentication protocol.
tacacs - Specifies the protocol as TACACS.
xtacacs - Specifies the protocol as XTACACS.
tacacs+ - Specifies the protocol as TACACS+.
radius - Specifies the protocol as RADIUS.
port - (Optional) Specifies the port number of authentication protocol for server host. Default value for
TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is 1812.
<int 1-65535> - Enter the port number here. This value must be between 1 and 65535.
key - (Optional) Specifies the key for TACACS+ and RADIUS authentication. If the value is null, no encryption will
apply. This value is meaningless for TACACS and XTACACS.
<key_string 254> - Enter the TACACS+ key here. This value can be up to 254 characters long.
none - Specifies that there is no encryption for TACACS+ and RADIUS authentication. This value is
meaningless for TACACS and XTACACS.
timeout - (Optional) Specifies the time in second for waiting server reply. Default value is 5 seconds.
<int 1-255> - Enter the timeout value here. This value must be between 1 and 255 seconds.
retransmit - (Optional) Specifies the count for re-transmit. This value is meaningless for TACACS+. Default value
is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.