DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
89
DGS-1510-28XMP/ME:admin# show current_config access_profile
Command: show current_config access_profile
#-------------------------------------------------------------------
# ACL
create access_profile ethernet vlan profile_id 1
config access_profile profile_id 1 add access_id 1 ethernet vlan default port 1 permit
create access_profile ip source_ip_mask 255.255.255.255 profile_id 2
config access_profile profile_id 2 add access_id 1 ip source_ip 10.10.10.10 port 2 deny
#-------------------------------------------------------------------
6-10 show access_profile hw_info
Description
This command is used to the ACL hardware usage information.
Format
show access_profile hw_info
Parameters
None.
Restrictions
None.
Example
To display the ACL hardware usage information:
To Next Page
Loading...
