D-Link DGS-3120-24PC - Page 354

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
350
Example
To enable MLD snooping on the Switch:
DGS-3120-24TC:admin# enable mld_snooping
Command: enable mld_snooping
Success.
DGS-3120-24TC:admin#
35-29 disable mld_snooping
Description
This command is used to disable MLD snooping on the Switch.
Format
disable mld_snooping
Parameters
When the Switch receives an MLD report packet from a port, this port will be learned as a
member port of the multicast group that the port is reported, and the router will be a default
member of this multicast group. The multicast packet destined for this multicast group will be
forwarded to all the members of this multicast group.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable MLD snooping on the Switch:
DGS-3120-24TC:admin# disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3120-24TC:admin#
35-30 show mld_snooping
Description
This command is used to display the current MLD snooping configuration on the Switch.
Format
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}