D-Link DGS-3120-24PC - Page 355

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
351
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view the IGMP snooping
configuration.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view the IGMP snooping
configuration.
<vlanid_list> - Enter the VLAN ID list here.
If VLAN is not specified, the system will display all current MLD snooping configurations.
Restrictions
None.
Example
To show MLD snooping:
DGS-3120-24TC:admin#show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Enabled
Data Driven Learning Max Entries : 128
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Querier State : Enabled
Querier Role : Non-Querier
Querier IP : ::
Querier Expiry Time : 0 secs
State : Disabled
Fast Done : Disabled
Rate Limit : No Limitation
Proxy Reporting : Disabled
Proxy Reporting Source IP : ::
Version : 2
Data Driven Learning State : Enabled
Data Driven Learning Aged Out : Disabled
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3120-24TC:admin#
35-31 show mld_snooping group
Description
This command is used to display the current MLD snooping group information on the Switch.