D-Link DGS-3120-24PC - Page 704

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
700
Format
show rmon
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the RMON related setting:
DGS-3120-24TC:admin# show rmon
Command: show rmon
RMON Rising Alarm Trap : Enabled
RMON Falling Alarm Trap : Enabled
DGS-3120-24TC:admin#
76-37 enable community_encryption
Description
This command is used to enable the encryption state on SNMP community string.
Format
enable community_encryption
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the encryption state on SNMP community string:
DGS-3120-24TC:admin#enable community_encryption
Command: enable community_encryption
Success.
DGS-3120-24TC:admin#