xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
701
76-38 disable community_encryption
Description
This command is used to disable the encryption state on SNMP community string.
Format
disable community_encryption
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the encryption state on SNMP community string:
76-39 show community_encryption
Description
This command is used to display the encryption state on SNMP community string.
Format
show community_encryption
Parameters
None.
Restrictions
None.
Example
To display the encryption state on SNMP community string:
To Next Page
Loading...
