Internet/Print Server User’s Guide
Quick Installation4
Mandatory Settings for Internet Access
Step 9: ISP Account -> Phone Number, when you signed-up for
an account with your ISP (internet service provider), you
should have been given an access phone number that your
modem will dial. Look under the “WAN Port Settings”
menu for this setting and enter the phone number provider
by your ISP.
Step 10: ISP Account -> User ID, your ISP should also have
assigned a User ID (aka, a username) that you will use for
logging-in. Also under “WAN Port Settings,” enter this user
ID exactly as it was provided to you.
Step 11: ISP Account -> Password, finally, to complete the ISP
login process, the internet/print server must provide the
password associated with the user ID assigned by your ISP.
Enter it.
You have now completed the basic steps necessary to install, config-
ure, and begin using the internet/print server. Note that, with
respect to steps 9–11, it may be necessary for you to use a “Login
Script” instead. If you enter the information required in those three
settings correctly and still have trouble logging-in, see the “Login
Script” section on page 30 to create a login script.
To Next Page
Loading...
Need help?
General
