D-Link DSL-2745 User Manual

17D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Getting Started
Step 3: Congure Wireless Network
This step of the wizard allows you to congure your Wireless network settings.
By default, wireless is enabled. If you want to disable the DSL-2745’s wireless
capability, uncheck Enable Your Wireless Network.
Under Wireless Network Name (SSID) you can change the SSID of your wireless
network, for easier identication by wireless clients. If Visibility Status is set
to Visible, this name will show up when a client in range scans for wireless
networks. Otherwise, if your network is Invisible, clients will have to enter the
SSID in order to connect.
Choose the best security level that is compatible with your wireless clients.
WPA2-PSK is recommended. Unless you chose None (this is NOT recommended),
you will need to enter a key below.
WPA/WPA2 Pre-Shared Key - Wireless clients requesting a connection with
the network will need to enter this key in order to connect.
Click Next to continue.

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English