D-Link DSL-2745 User Manual

43D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Modify a 1483 MER Connection
Click Apply Changes to have your changes take effect. Click Return to discard
your changes and return to the Internet Setup page. Click Undo to revert back
to the existing settings.
IP Interface: This shows the current interface being modified.
Protocol: This shows the current protocol being modified.
ATM VCC: The shows the current ATM VCC configuration.
Bridge: Select Bridged Ethernet (Transparent Bridging), Bridged
PPPoE(implies Bridged Ethernet), or Disable Bridge.
802.1q: Choose to either Disable or Enable the use of VLANs.
VLAN ID(1-4095): If you enabled 802.1q, enter the VLAN ID.
IP INTERFACE

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English