EasyManuals Logo

D-Link DSL-2745 User Manual

D-Link DSL-2745
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
42D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Modify a PPPoA Connection
Protocol: This shows the current protocol being modified.
ATM VCC: The shows the current ATM VCC configuration.
Login Name: You can change the currently configured DSL account username
here.
Password: You can change the currently configured DSL account password
here.
Authentication: Select PAP, CHAP, or Auto. The default is Auto.
Connection Type: How your DSL-2745 connects to your ISP. Choose either
Continuous, Connect on Demand, and Manual.
Idle Time(s): If you selected Connect on Demand, enter the amount time the
router waits if there is no activity before disconnecting.
Static IP: If you have been assigned a static IP by your ISP, enter it here.
Click Apply Changes to have your changes take effect. Click Return to discard
your changes and return to the Internet Setup page. Click Undo to revert back
to the existing settings.
PPP INTERFACE

Table of Contents

Other manuals for D-Link DSL-2745

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2745 and is the answer not in the manual?

D-Link DSL-2745 Specifications

General IconGeneral
BrandD-Link
ModelDSL-2745
CategoryNetwork Router
LanguageEnglish

Related product manuals