Unified Services Router CLI Reference Guide
104
Chapter 11. Configuration commands
under branch DOT11
11.1 dot11 profile add <ltprofile_name>
802.11 profile configuration mode.
Save profile configuration changes
Save profile configuration changes and exit current mode.
Set the 802.11 profile SSID.
Enable or disable SSID broadcast.
Set the profile security type.
Set WEP authentication type.
Set WEP key. Not required if passphrase is set.
WEP key index type (1-4)
String
Set WEP passphrase to generate WEP key from.
WEP key index type (1-4)
String
Set WPA authentication type.
WPA Passw ord. Needed only if authentication is PSK
11.2 dot11 profile edit <ltprofile_name>
802.11 profile configuration mode.
Save profile configuration changes
Save profile configuration changes and exit current mode.
Set the 802.11 profile SSID.
Enable or disable SSID broadcast.
Set the profile security type.
Set WEP authentication type.
Set WEP key. Not required if passphrase is set.