Unified Services Router CLI Reference Guide
80
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
destination_address_start
IP of the Destination user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
IP of the Destiation user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Firew all type of service
firew all type of service
WAN interface for Source NAT settings
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
The port number to use for DNAT, required if port
forwarding is enabled
enable/disable port forwarding based on this firewall
rule configuration settings
Send to Local Server (DNAT IP),Specifies an IP
address and port number of a machine on the Local
Netw ork which is hosting the server.
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Set it as Dedicated/configured WAN
9.16 security firewall ipv4 enable <ltrow_id>
Firew all IPV4 rules configuration mode.
9.17 security firewall ipv4 disable <ltrow_id>
Firew all IPV4 Rules configuration mode.
9.18 security firewall ipv4 delete <ltrow_id>
Firew all IPV4 Rules configuration mode.
9.19 security firewall ipv4 move <ltrow_id>
Firew all IPV4 Rule reordering mode.
Row id(s) a,b,c w here each part is a valid row id
in the range [0-9]
Save Firew all IPV4 rule reordering changes.