Unified Services Router CLI Reference Guide
78
custom services configuration mode.
9.13 security firewall ipv4 configure
Save Firew all IPV4 rules configuration changes.
Save Firew all IPV4 rules configuration changes and
exit current mode.
Roll back IPV4 rules configuration changes.
Set from Zone security type
Set From Zone VLAN using corresponding VLAN
name
Set to Zone security type
Set To Zone VLAN using corresponding VLAN name
Name of the custom service for which a rule is to be
added custom name should already be added into
custom service
Name of the service for which a rule is to be added
Action to be taken by the rule
firew all rule action type
Name of schedule for which the rule is applicable
firew all rule address type
Type of the destination user
firew all rule address type
firew all rule snat address type
firew all rule log enable/disable
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
destination_address_start
IP of the Destination user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
IP of the Destiation user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Firew all type of service
firew all type of service
WAN interface for Source NAT settings
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255