Unified Services Router CLI Reference Guide
94
syslog_server server_name7
name
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
syslog_server server_name7
severity
syslog server severity types
syslog_server server_name7
facility
syslog server facility ID types
syslog_server server_name8
enable
syslog_server server_name8
name
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
syslog_server server_name8
severity
syslog server severity types
syslog_server server_name8
facility
syslog server facility ID types
10.4 system logging ipv6 configure
Save ipv6 logging configuration changes.
Save ipv6 logging configuration changes and exit current mode.
Roll back ipv6 logging configuration changes.
Enable/Disable logging for the LAN to WAN Accept packets
Enable/Disable logging for the LAN to WAN Dropped packets
Enable/Disable logging for the WAN to LAN Accept packets
Enable/Disable logging for the WAN to LAN Dropped packets
10.5 system remote_management https
configure
save access Management changes for https.
Save access Management changes for https and exit
current mode.
Roll back Remote Mgmt changes.
Enable/disable remote mgmt over https.
Enable/disable remote mgmt over https.
Set the starting IP in case of range, and the IP to be
allow ed access in case of granting access to a particular
machine
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
Set the Ending IP in case of range.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
Set the port you w ant to use for HTTP.
Enable/disable remote snmp.