D-Link DSR-1000 Reference Guide

Unified Services Router CLI Reference Guide
95
10.6 system remote_management telnet
configure
S.No
Command
Name
Description
Type and Description
1
save
save access Management changes for telnet.
2
exit
Save access Management changes for telnet and exit
current mode.
3
cancel
Roll back Remote Mgmt changes.
4
enable
Enable/disable remote mgmt over telnet.
Boolean choice
5
type
The kind of access you want to allow .
Unsigned integer
6
from_address
Set the starting IP in case of range, and the IP to be
allow ed access in case of granting access to a particular
machine
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
7
to_address
Set the Ending IP in case of range.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
10.7 system snmp trap configure <ltagent_ip>
S.No
Command
Name
Description
Type and Description
1
<ltagent_ip>
SNMP trap configuration mode.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
2
save
Save SNMP trap configuration changes.
3
exit
Save SNMP trap configuration changes and exit current
mode.
4
cancel
Roll back snmp configuration changes.
5
agent
The IP address of the SNMP agent.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
6
snmp_version
Snmp Version v1/v2/v3
String
7
port
SNMP trap port the trap messages w ill be sent to.
Port number
8
community
The community string to w hich the agent belongs. Most
agents are configured to listen for traps in the Public
community
String
10.8 system snmp trap delete <ltagent_ip>
S.No
Command
Name
Description
Type and Description
1
<ltagent_ip>
Delete a SNMP trap
configuration.
IP address AAA.BBB.CCC.DDD w here each part is in the range
0-255
10.9 system snmp users configure <ltuser>
S.No
Command Name
Description
Type and Description
1
<ltuser>
SNMP v3 User list configuration changes
snmpv3uers list user type
2
save
Save SNMP trap configuration changes.

D-Link DSR-1000 Specifications

General

Brand	D-Link
Model	DSR-1000
Category	Network Router
Language	English