Unified Services Router CLI Reference Guide
14
show net wan wan1 ipv4 status
Display ipv4 w an1 Information.
show net wan wan1 ipv4 setup
Display Wan1 Setup Information.
show net wan wan2 ipv4 status
Display ipv4 w an2 Information.
show net wan wan2 ipv4 setup
Display w an2 Setup Information.
Display the w an3 configuration
show net wan wan3 threeG setup
Display w an3 Information.
show net wan wan3 threeG status
Display w an mode Information.
Display w an port Information.
show net wan configurable_port
Display configurable port Information.
show net wan wan1 ipv6 status
Display ipv6 w an1 Information.
show net wan wan1 ipv6 setup
Display Wan1 Setup Information.
show net wan wan2 ipv6 status
Display ipv6 w an2 Information.
show net wan wan2 ipv6 setup
Display Wan2 Setup Information.
show OSPFv2 Configuration
show OSPFv3 Configuration
show net routing ospfv2 setup
Display OSPFv2 Configuration
show net routing ospfv3 setup
Display OSPFv3 Configuration
show net port management setup
Display port management configuration
Display pppoe client Configuration.
show net routing protocol_binding
show protocol_binding rules
show net routing protocol_binding setup
Display protocol Binding Rules
Display RADVD configuration
Show dynamic routing setup
show net routing dynamic setup
Show dynamic routing Setup.
show net routing static ipv4
show net routing static ipv4 setup
Show all the configured IPV4 routes.
show net routing static ipv6
show net routing static ipv6 setup
Show all the configured IPV6 routes.
Display UPnP portmap Information.
Display UPnP portmap Information.
The command show security ? at the CLI prompt would give the description of all the s how
commands in the branch security , which is as follows :
show security advanced_network
show advanced firewall attack checks
show security advanced_network attack_checks
Display Security Checks configuration
show security advanced_network igmp
Display igmp configuration
show security advanced_network ips
Display ips configuration
show security application_rules
show security application_rules setup
Display application rules configuration