D-Link DSR-1000 - Page 227

227
付録D ログメッセージ
ログメッセージ 緊急度 ログメッセージ 緊急度
radConfGet: " DEBUG Invalid SQLITE operation code - %d ERROR
Added Server %s:%d with " DEBUG sqlite3QueryResGet failed ERROR
Added Server %s:%d with " DEBUG empty result. nRows=%d nCols=%d ERROR
Default Timeout Set to %d DEBUG sqlite3QueryResGet failed ERROR
Default Retry Count Set to %d DEBUG empty result. nRows=%d nCols=%d ERROR
%s - %s : %d DEBUG RADIUS Accounting Exchange Failed ERROR
Deleting Server %s:%d with " DEBUG Unable to set debug for radAcct. ERROR
Adding RowId:%d to Server %s:%d with " DEBUG Unable to set debug level for radAcct. ERROR
rowIds: %d - %d DEBUG ERROR: option value not specied ERROR
Deleting Server %s:%d with " DEBUG ERROR: option value not specied ERROR
RADIUS Decongured DEBUG Unable to initialize radius ERROR
Found Option %s on line %d of le %s DEBUG radEapMsgQueueAdd: Invalid EAP packet length(%d) ERROR
Setting Option %s with value %s DEBUG radEapRecvTask: invalid EAP code:%d ERROR
RADIUS Congured DEBUG radEapRecvTask: Packet length mismatch %d, %d ERROR
%d : Server %s:%d with " DEBUG No attributes received in Access- Challenge message ERROR
DBUpdate event: Table: %s opCode:%d rowId:%d DEBUG No State Attribute in Access- Challenge message ERROR
Host IP address: %s DEBUG radEapRecvTask: " ERROR
Adding Packet for existing cookie:%p DEBUG failed to initialize UMI ERROR
Adding Packet and cookie:%p DEBUG umiRegister failed. errno=%d ERROR
Releasing Packet and cookie:%p DEBUG Invalid arguments to ioctl handler ERROR
Releasing Packet with cookie:%p DEBUG radEapSendRtn: Invalid Arguments ERROR
Received EAP-Identity from Pnac: %s DEBUG radEapSendRtn: failed to allocate bu󱐯er ERROR
Filling User-Name: %s DEBUG umiIoctl failed ERROR
Filling State: DEBUG failed to initialize EAP message queue ERROR
Filling EAP-Message: DEBUG Unable to set debug for radEap. ERROR
Filling Service-Type: %d DEBUG Unable to set debug level for radEap. ERROR
Filling Framed-MTU: %d DEBUG ERROR: option value not specied ERROR
Received Access-Challenge from Server DEBUG ERROR: option value not specied ERROR
Sending Reply EAP Packet to Pnac DEBUG could not initialize MGMT framework ERROR
Error sending packet to Pnac DEBUG Unable to initialize radius ERROR
RADIUS Authentication Failed; " DEBUG Unable to set debug for radEap. ERROR
RADIUS Authentication Successful; " DEBUG Unable to set debug level for radEap. ERROR
Got Packet with cookie:%p DEBUG ERROR: option value not specied ERROR
Next DNS Retry after 1 min DEBUG Unable to initialize radius ERROR
Next Synchronization after" DEBUG Invalid username or password ERROR
Next Synchronization after" DEBUG Unable to set debug for radAuth. ERROR
Next Synchronization after %d \ DEBUG Unable to set debug level for radAuth. ERROR
Primary is not available, " DEBUG ERROR: option value not specied ERROR
Secondary is not available, " DEBUG Unable to initialize radius ERROR
Invalid value for use default servers, " DEBUG Invalid username, challenge or response ERROR
No server is congured, " DEBUG Unable to set debug for radAuth. ERROR
Backing o󱐯 for %d seconds DEBUG Unable to set debug level for radAuth. ERROR
Requesting time from %s DEBUG ERROR: option value not specied ERROR
Synchronized time with %s DEBUG Unable to initialize radius ERROR
Received KOD packet from %s DEBUG Invalid username or password ERROR
No suitable server found %s DEBUG usage : %s <DB leName> ERROR
Received Invalid Length packet from %s DEBUG ntpd : umi initialization failed ERROR
Received Invalid Version packet from %s DEBUG ntpd : ntpInit failed ERROR
Received Invalid Mode packet from %s DEBUG ntpd : ntpMgmtInit failed ERROR
Request Timed out from %s DEBUG
There was an error while getting the timeZoneChangeScript." ERROR
Looking Up %s DEBUG unexpected reply from %d cmd=%d ! ERROR
Timezone di󱐯erence :%d DEBUG cmd %d not supported. caller %d ERROR
Could not open le: %s DEBUG default reached ERROR
Could not read data from le DEBUG Unable to initialize ntpControl ERROR