D-Link DSR-1000 - Page 240

240
付録D ログメッセージ
ログメッセージ 緊急度 ログメッセージ 緊急度
ip_rt_bug: %u.%u.%u.%u -> %u.%u.%u.%u, %s, DEBUG %02x, ((u_int8_t *)p)[i] DEBUG
udp cork app bug 2) DEBUG rst di󱐯erence at byte %u, i DEBUG
udp cork app bug 3) DEBUG ieee80211_crypto_newkey failed DEBUG
udp v4 hw csum failure.) DEBUG ieee80211_crypto_setkey failed DEBUG
UDP: short packet: From %u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG unable to allocate skbu󱐯 DEBUG
UDP: bad checksum. From %d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
DEBUG tkip enmic failed DEBUG
%s: lookup policy [list] found=%s, DEBUG enmic botch; length mismatch DEBUG
%s: called: [output START], __FUNCTION__ DEBUG enmic botch DEBUG
%s: ow dst=%s, __FUNCTION__, XFRMSTRADDR(->4_dst,
family)
DEBUG tkip encap failed DEBUG
%s: ow src=%s, __FUNCTION__, XFRMSTRADDR(->4_src,
family)
DEBUG encrypt phase1 botch DEBUG
%s: ow dst=%s, __FUNCTION__, XFRMSTRADDR(->6_dst,
family)
DEBUG encrypt data length mismatch DEBUG
%s: ow src=%s, __FUNCTION__, XFRMSTRADDR(->6_src,
family)
DEBUG encrypt data does not compare DEBUG
a guy asks for address mask. Who is it? DEBUG tkip decap failed DEBUG
icmp v4 hw csum failure) DEBUG decrypt phase1 botch DEBUG
expire>> %u %d %d %d, expire, DEBUG decrypt data does not compare DEBUG
expire++ %u %d %d %d, expire, DEBUG decap botch; length mismatch DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash, DEBUG decap botch; data does not compare DEBUG
rt_bind_peer(0) @%p, NET_CALLER(iph) DEBUG tkip demic failed DEBUG
ip_rt_advice: redirect to DEBUG 802.11i TKIP test vectors passed DEBUG
ip_rt_bug: %u.%u.%u.%u -> %u.%u.%u.%u, %s, DEBUG %s, buf DEBUG
UDP: short packet: From %u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG Atheros HAL assertion failure: %s: line %u: %s, DEBUG
UDP: bad checksum. From %d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
DEBUG ath_hal: logging to %s %s, ath_hal_logle, DEBUG
a guy asks for address mask. Who is it? DEBUG ath_hal: logging disabled DEBUG
b_add_ifaddr: bug: prim == NULL DEBUG %s%s, sep, ath_hal_buildopts[i] DEBUG
b_del_ifaddr: bug: prim == NULL DEBUG ath_pci: No devices found, driver not installed. DEBUG
expire>> %u %d %d %d, expire, DEBUG _fmt, __VA_ARGS__ DEBUG
expire++ %u %d %d %d, expire, DEBUG %s: Warning, using only %u entries in %u key cache, DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash, DEBUG %s: TX99 support enabled, dev->name DEBUG
rt_bind_peer(0) @%p, DEBUG %s:grppoll Buf allocation failed ,__func__ DEBUG
ip_rt_advice: redirect to DEBUG %s: %s: unable to start recv logic, DEBUG
ip_rt_bug: %u.%u.%u.%u -> %u.%u.%u.%u, %s, DEBUG %s: %s: unable to start recv logic, DEBUG
%s: lookup policy [list] found=%s, DEBUG %s: no skbu󱐯, __func__ DEBUG
%s: called: [output START], __FUNCTION__ DEBUG %s: hardware error; resetting, dev- >name DEBUG
%s: ow dst=%s, __FUNCTION__, XFRMSTRADDR(->4_dst,
family)
DEBUG %s: rx FIFO overrun; resetting, dev- >name DEBUG
%s: ow src=%s, __FUNCTION__, XFRMSTRADDR(->4_src,
family)
DEBUG %s: unable to reset hardware: '%s' (HAL status %u) DEBUG
%s: ow dst=%s, __FUNCTION__, XFRMSTRADDR(->6_dst,
family)
DEBUG %s: unable to start recv logic, dev- >name DEBUG
%s: ow src=%s, __FUNCTION__, XFRMSTRADDR(->6_src,
family)
DEBUG %s: %s: unable to reset hardware: '%s' (HAL status %u), DEBUG
a guy asks for address mask. Who is it? DEBUG %s: %s: unable to start recv logic, DEBUG
icmp v4 hw csum failure) DEBUG ath_mgtstart: discard, no xmit buf DEBUG
expire>> %u %d %d %d, expire, DEBUG %s: [%02u] %-7s , tag, ix, ciphers[hk- >kv_type] DEBUG
expire++ %u %d %d %d, expire, DEBUG %02x, hk->kv_val[i] DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash, DEBUG mac %s, ether_sprintf(mac) DEBUG
rt_bind_peer(0) @%p, NET_CALLER(iph) DEBUG %s , sc->sc_splitmic ? mic : rxmic DEBUG