D-Link DSR-150 - Page 109

D-Link DSR-Series User Manual 95
Section 6 - Wireless Settings
Field Description
Access Control List Status
AP Name This is the name of the Prole that is being congured. Select an AP Name from the drop-down menu.
ACL Policy Status
It indicates the type of access policy: Allow, Deny, or Open. An Allow policy permits connections by a
client whose MAC address appears in the list. A Deny policy prevents connections by a client whose
MAC address appears in the list. An Open policy permits all clients to connect and does not lter access
based on the list.
Save Click Save to activate your settings.
MAC Filter List
MAC Address
This list shows all the MAC addresses of computers and devices which are authorized/unauthorized
(based on the default ACL Policy) to connect to this access point.
6. To add a new MAC address, click Add New MAC Filter.
Field Description
MAC Address
Enter the MAC (Media Access Control) address of the client that you would like to add to the list of
MAC addresses. The format for the MAC address is XX:XX:XX:XX:XX:XX where X is a number from 0 to 9
(inclusive) or an alphabetical letter between A and F (inclusive).
7. To check the status of the access point, right click a current entry in the access point list and click
Status.
8. It opens the Access Point Status page, displaying trac statistics for the AP and the list of the connected
clients.