D-Link DSR-250N - Page 254

Unified Services Router User Manual
252
>msg_iov[i].iov_base)[j]
%02X, skb->data[i] DEBUG De initializing by \ INFO
_lvl PPPOL2TP: _fmt, ##args
DEBUG
kernel UMI module loaded
INFO
%02X, ptr[length]
DEBUG
kernel UMI module unloaded
INFO
%02X, ((unsigned char *) m-
>msg_iov[i].iov_base)[j]
DEBUG
Loading bridge module
INFO
%02X, skb->data[i] DEBUG Unloading bridge module INFO
_lvl PPPOL2TP: _fmt, ##args
DEBUG
unsupported command %d, cmd
INFO
%02X, ptr[length]
DEBUG
Loading ifDev module
INFO
%02X, ((unsigned char *) m-
>msg_iov[i].iov_base)[j]
DEBUG
Unloading ifDev module
INFO
%02X, skb->data[i]
DEBUG
ERROR#%d in alloc_chrdev_region,
result
INFO
KERN_EMERG THE value read is
%d,value*/
DEBUG
ERROR#%d in cdev_add, result
INFO
KERN_EMERG Factory Reset button is
pressed
DEBUG
using bcm switch %s, bcmswitch
INFO
KERN_EMERG Returing error in INTR
registration
DEBUG
privlegedID %d wanporttNo: %d,
privlegedID,wanportNo
INFO
KERN_EMERG Initialzing Factory
defaults modules
DEBUG
Loading mii
INFO
Failed to allocate memory for
pSipListNode
DEBUG
Unloading mii
INFO
SIPALG: Memeory allocation failed for
pSipNodeEntryTbl
DEBUG
%s: Version 0.1
INFO
pkt-err %s, pktInfo.error
DEBUG
%s: driver unloaded, dev_info
INFO
pkt-err %s, pktInfo.error
DEBUG
wlan: %s backend registered, be-
>iab_name
INFO
pkt-err %s, pktInfo.error DEBUG wlan: %s backend unregistered, INFO
%s Len=%d, msg, len
DEBUG
wlan: %s acl policy registered, iac-
>iac_name
INFO
%02x , ((uint8_t *) ptr)[i]
DEBUG
wlan: %s acl policy unregistered, iac-
>iac_name
INFO
End
DEBUG
%s, tmpbuf
INFO
CVM_MOD_EXP_BASE MISMATCH
cmd=%x base=%x, cmd,
DEBUG
VLAN2
INFO
op->sizeofptr = %ld, op->sizeofptr
DEBUG
VLAN3
INFO
opcode cmd = %x, cmd
DEBUG
VLAN4 <%d %d>,
INFO
modexp opcode received
DEBUG
%s: %s, dev_info, version
INFO
Memory Allocation failed
DEBUG
%s: driver unloaded, dev_info
INFO
modexpcrt opcode received
DEBUG
%s, buf
INFO
kmalloc failed
DEBUG
%s: %s (, dev_info, ath_hal_version
INFO
kmalloc failed
DEBUG
%s: driver unloaded, dev_info
INFO
kmalloc failed
DEBUG
%s: %s: mem=0x%lx, irq=%d
hw_base=0x%p,
INFO
kmalloc failed
DEBUG
%s: %s, dev_info, version
INFO
kmalloc Failed
DEBUG
%s: driver unloaded, dev_info
INFO
kmalloc failed
DEBUG
%s: %s: mem=0x%lx, irq=%d,
INFO
unknown cyrpto ioctl cmd received %x,
cmd
DEBUG
%s: %s: mem=0x%lx, irq=%d,
INFO
register_chrdev returned ZERO
DEBUG
%s: %s, dev_info, version
INFO
const char *descr, krb5_keyblock *k) {
DEBUG
%s: driver unloaded, dev_info
INFO
F password, &pdata
DEBUG
%s, buf
INFO