D-Link DSR-250N - Page 263

Unified Services Router User Manual
261
failed ,__func__
int)len
%s: unable to start recv logic, DEBUG %03d:, i ERROR
%s: Invalid interface id = %u, __func__,
if_id
DEBUG
%02x, ((unsigned char *)p)[i]
ERROR
%s: unable to allocate channel table,
__func__
DEBUG
mic check failed
ERROR
%s: Tx Antenna Switch. Do internal
reset., __func__
DEBUG
%s: 0x%p len %u, tag, p, (unsigned
int)len
ERROR
Radar found on channel %d (%d MHz),
DEBUG
%03d:, i
ERROR
End of DFS wait period
DEBUG
%02x, ((unsigned char *)p)[i]
ERROR
%s error allocating beacon, __func__
DEBUG
mic check failed
ERROR
failed to allocate UAPSD QoS NULL tx
descriptors: %d, error
DEBUG
[%s] Wrong parameters, __func__
ERROR
failed to allocate UAPSD QoS NULL
wbuf
DEBUG
[%s] Wrong Key length, __func__
ERROR
%s: unable to allocate channel table,
__func__
DEBUG
[%s] Wrong parameters, __func__
ERROR
%s: unable to update h/w beacon queue
parameters,
DEBUG
[%s] Wrong Key length, __func__
ERROR
ALREADY ACTIVATED
DEBUG
[%s] Wrong parameters, __func__
ERROR
%s: missed %u consecutive beacons,
DEBUG
[%s] Wrong Key length, __func__
ERROR
%s: busy times: rx_clear=%d,
rx_frame=%d, tx_frame=%d, __func__,
rx_clear, rx_frame, tx_frame
DEBUG
[%s] Wrong parameters, __func__
ERROR
%s: unable to obtain busy times,
__func__
DEBUG
[%s] Wrong Key length, __func__
ERROR
%s: beacon is officially stuck,
DEBUG
[%s]: Wrong parameters, __func__
ERROR
Busy environment detected
DEBUG
[%s] Wrong Key Length %d, __func__,
des_key_len
ERROR
Inteference detected DEBUG
[%s] Wrong parameters %d, __func__,
des_key_len ERROR
rx_clear=%d, rx_frame=%d,
tx_frame=%d,
DEBUG
[%s] Wrong Key Length %d, __func__,
des_key_len
ERROR
%s: resume beacon xmit after %u
misses,
DEBUG
[%s] Wrong parameters, __func__
ERROR
%s: stuck beacon; resetting (bmiss
count %u),
DEBUG
[%s] Wrong Key Length, __func__
ERROR
EMPTY QUEUE
DEBUG
[%s] Wrong parameters, __func__
ERROR
SWRInfo: seqno %d isswRetry %d
retryCnt %d,wh ? (*(u_int16_t *)&wh-
>i_seq[0]) >> 4 : 0, bf->bf_isswretry,bf-
>bf_swretries
DEBUG
[%s] Wrong Key Length, __func__
ERROR
Buffer #%08X --> Next#%08X
Prev#%08X Last#%08X,bf,
TAILQ_NEXT(bf,bf_list),
DEBUG
[%s] Wrong parameters, __func__
ERROR
Stas#%08X flag#%08X
Node#%08X, bf->bf_status, bf-
>bf_flags, bf->bf_node
DEBUG
[%s] Wrong parameters, __func__
ERROR
Descr #%08X --> Next#%08X
Data#%08X Ctl0#%08X Ctl1#%08X, bf-
>bf_daddr, ds->ds_link, ds->ds_data,
ds->ds_ctl0, ds->ds_ctl1
DEBUG
[%s] Wrong parameters, __func__
ERROR
Ctl2#%08X Ctl3#%08X
Sta0#%08X Sta1#%08X,ds->ds_hw[0],
ds->ds_hw[1], lastds->ds_hw[2], lastds-
>ds_hw[3]
DEBUG
[%s] Wrong parameters, __func__
ERROR
Error entering wow mode
DEBUG
device name=%s not found, pReq-
ERROR