DVG-2102S User’s Manual ADVANCED
D-Link Systems, Inc. 53
ADVANCED → VoIP → Line
Hunting/Ring: It is used to set FXS group hunting mode. There are Hunting, Simultaneous Ring and
Sequential Ring.
Hunting: When someone calls in by dialing FXS representative number, the system will always assign the
call to the first line.
Simultaneous Ring: When someone calls in by dialing FXS representative number, all FXS ports will ring
at the same time.
Sequential Ring: When someone calls in by dialing FXS representative number, the system will assign the
call to each FXS ports in order according Sequential Ring Time. You can adjust Sequential Ring Time for
the ring time of each port.
To Next Page
Loading...
