DVG-2102S User’s Manual Dialing Principles
D-Link Systems, Inc. 86
5-3 Routing
To achieve maximum flexibility, the number dialed will be looked up in several tables defined by the VoIP
Telephone Adapter. If no match is found from Digit Map Table, it will then look up the number from another
table and to the registered VoIP Service Provdier.
Routing Processing Flow
The routing after checking Digit Map Table may be vary. The routing accords with VoIP Route Profile. By
default, Phone Book is the first route of VoIP Route Profile. The second and third route is Server 1 and Server 2.
Server 3 is the last route. Each server has a dialing plan, i.e. number translation, table, and the number will be
translated according the dialing plan before dialing out. For default setting, the number look up flow appears
like:
Assume that the route of Default Route Profile is Server 2 as the first route, Server 3 as the second route and
Server 1 as the last route. The number look up flow appears like:
Digit Map
Tab le
Phone
Book
Server 1
Server 2
Server 3
Digit Map
Tab le
Server 2
Server 3
Server 1
To Next Page
Loading...
