DVG-2102S User’s Manual Dialing Principles
D-Link Systems, Inc. 85
5. Dialing Principles
5-1 Dialing Options
Dial the phone number which you want to call and press # to call out immediately. Note that if the “#
(pound)” not dialed, the number will be called out after 4 seconds by default. The period between number
dialed and call out is named “Inter Digits Timeout”.
If the phone number matches the setting of the Digit Map, the phone number will be dialed out through the
assigned interface automatically.
The phone number should contain at least 2 digits (not including * and #).
5-2 Number Translation
Phone number is dialed by user. The system will check if the phone number is matched Digit Map Table. If
no matched is found from Digit Map Table, it will use the phone number to look up number translation of the
server set in VoIP Routing Profile.
To Next Page
Loading...
